#Deadbolt installation kit install

#Deadbolt installation kit install

Find and install the included adapter which fits the tailpiece of your lock.

Make sure not to over-tighten the screws, as this can damage the threading and make removal difficult in the future.

Making sure the plate is level, tighten the screws until snug

Attach the Wyze Lock Mounting Plate in place of the old thumb-latch.

Insert the screws from Step 3 into the Wyze Lock Mounting Plate.

Also remove any additional back plates at this time if there are any.Use your screwdriver to remove the screws from your existing deadbolt’s thumb-latch.Use the supplied adhesive strip to hold the outside of the lock in place.If you're unsure of whether Wyze Lock will work with your current deadbolt, we've got you covered with our Wyze Lock Compatibility Guide. If you do run into any trouble with the process outlined on this page though, check out our Troubleshooting section for tips on getting things installed properly. Normal use will produce natural relief of the oxidized finish and reveal rich highlights on raised portions of the door handle design.Installing your new Wyze Lock is meant to be as straightforward as possible. 1 screw pack (includes mounting screws for rosette, strikeplate, faceplate)Įmtek Low Profile Brass Deadbolt Product Features:Įmtek's rosettes for brass deadbolt locks are forged (not cast or stamped) from solid brass to yield thick and heavy products for a truly solid look and feel.Įmtek brass deadbolt rosettes are hand-buffed for maximum polish.Įmtek's deadbolt strikeplates and faceplates are solid brass.įrench Antique, Pewter, and Oil Rubbed Bronze finishes are hand relieved to give each part individual character.Įmtek's Oil Rubbed Bronze finish is underlain with copper.1 hardened steel bolt with brass faceplate attached.1 Schlage-keyed cylinder, housing collar, rosette for door interior (double-cylinder function only).1 thumbturn and rosette for door interior (single-cylinder function only).1 Schlage-keyed cylinder, housing collar, rosette for door exterior.This complete deadbolt lockset includes everything you need for one door: In most cases we do not recommend double-cylinder deadbolts. However, safety concerns are raised with double-cylinder deadbolts as it is more difficult to unlock the door from the inside when trying to escape in case of fire (because a key is required to open the locked door). The single-cylinder function is the most common, providing exterior security, but the thumb-turn provides safety for an easy exit in case of fire or other emergency.ĭouble-cylinder deadbolts are commonly used on doors with glass panels, or nearby windows, to prevent intruders from reaching through the glass to unlock the door (as a key is required to unlock the bolt from both the inside and outside of the door).

Single-cylinder deadbolts have a keyed-cylinder on the exterior side, and a thumb-turn on the inside. For thicker doors up to 2-7/8', specify during checkout. For thicker doors up to 3-3/8', specify during checkout.ĭouble-cylinder fits doors 1-1/4' to 2-1/8' thick. Single-cylinder fits doors 1-1/4' to 2-1/4' thick. Emtek deadbolts have Schlage-keyed cylinders - only Schlage keys are compatible with Emtek deadbolts.